Have you ever encountered a stripped–screw-simple-diy-fixes” title=”How to Repair a Stripped Screw – Simple DIY Fixes”>repair-a-easily–drill-out-a-stuck-screw” title=”How to Easily Drill Out a Stuck Screw”>stripped–remove-a-screw-with-a-stripped-head” title=”How to remove a screw with a stripped head”>screw–extract-a-stripped-screw-from-metal” title=”How to Extract a Stripped Screw from Metal”>simple-diy-fixes” title=”How to Repair a Stripped Screw – Simple DIY Fixes”>stuck while doing a DIY project? This can be frustrating, especially if you don’t know how to it properly. But don’t worry, there are several methods you can use to remove-a-broken-screw” title=”How to remove a broken screw”>remove extract-a-stripped-screw-from-metal” title=”How to Extract a Stripped Screw from Metal”>that stubborn screw.

Here are some tips on how to remove a stuck screw:

1. Apply Heat
One of the most effective ways to loosen a stuck screw is by applying heat. You can use a small torch or a soldering iron to heat the area around the screw for a few minutes. This will cause the metal to expand and contract, breaking the bond between the screw and the material it’s stuck in. Once the area cools down, try turning the screw using a screwdriver.

2. Use a Screw Extractor
A screw extractor is a tool designed to remove or screws. It works by gripping onto the screw and turning it counterclockwise. To use a screw extractor, drill a small hole into the center of the screw and insert the extractor into the hole. Turn the extractor counterclockwise until the screw is removed.

3. Apply Lubricant
Another method to remove a stuck screw is by applying a lubricant such as WD-40, penetrating oil, or vinegar. Apply the lubricant onto the screw and let it sit for a few minutes to penetrate into the threads. This will help loosen the bond between the screw and the material it’s stuck in. Once the lubricant has had time to work, try turning the screw using a screwdriver.

4. Tap the Area
Sometimes tapping the area around the stuck screw can help loosen it. Use a hammer or a mallet to tap the area around the screw while you try to turn it with a screwdriver. This will help to break the bond between the screw and the material and make it easier to turn.

5. Use Pliers or a Wrench
If the screw head is sticking out, you can use pliers or a wrench to turn it. Grip onto the screw head with a pair of pliers or a wrench and try turning it counterclockwise. If the screw head is too small or the pliers or wrench can’t grip onto it properly, you may want to try one of the other methods listed above.

Conclusion
Removing a stuck screw can be frustrating, but there are several methods you can use to make the job easier. Whether you choose to apply heat, use a screw extractor, apply lubricant, tap the area, or use pliers or a wrench, be patient and take your time. With a little effort and some creativity, you should be able to remove that stubborn screw and complete your DIY project with ease.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!