If you enjoy outdoor cooking and barbecues, building a masonry barbecue with a hood can be a fantastic addition to your backyard. Not only can it elevate your grilling experience, but it also adds a luxurious touch to your outdoor living space. In this step-by-step guide, we will walk you through the process of building your own masonry barbecue with a hood.

Materials Needed

  • Concrete blocks
  • Cement
  • Grill grate
  • Reinforcing mesh
  • Concrete mix
  • Firebricks
  • Sand
  • Fireclay
  • Bricklayer's trowel and jointer
  • Level
  • Wire brush
  • Measuring tape

Step 1: Planning and Layout

Start by selecting the perfect spot for your masonry barbecue. Consider factors such as proximity to your kitchen, prevailing wind direction, and shelter from rain. Once you have chosen the location, mark the precise area where your barbecue will be built using stakes and string.

Step 2: Building the Foundation

Remove any grass or debris within the marked area. Dig a trench approximately 8 to 10 inches deep and level the bottom. Mix concrete according to the manufacturer's instructions and pour it into the trench. Smooth the surface using a trowel and let it cure for at least 48 hours.

Step 3: Constructing the Base

Once the foundation is solid, lay the first layer of concrete blocks on top of it using cement mortar as a binding agent. Ensure the blocks are level and secure. Continue adding layers of blocks, checking for levelness after each layer. Leave an opening where you want the grill grate to be placed.

Step 4: Building the Hood

Using firebricks and mortar, construct the hood above the grill area. Form an arch shape with the firebricks, using a level to ensure accuracy. The hood should be sturdy and able to withstand the heat generated by the grill.

Step 5: Finishing Touches

Once the main structure is complete, it's time to add final touches. Lay reinforcing mesh over the entire barbecue, ensuring it covers the side walls as well. Mix concrete, sand, and fireclay to create a smooth plaster, and apply it over the mesh using a trowel. Smooth the surface and let it dry for a few hours.

Step 6: Installing the Grill Grate

Finally, place the grill grate on top of the opening you left in Step 3. Ensure it fits securely and is at a suitable height for cooking. You may need to adjust the support blocks or add additional ones to achieve the desired grill height.

And voila! Your homemade masonry barbecue with a hood is ready to take your outdoor cooking to the next level. Now, invite friends and family over and enjoy delicious meals in your own backyard oasis!

We hope this step-by-step guide has inspired you to build your own masonry barbecue. Remember to always prioritize safety during construction and consult local regulations if necessary. Happy building and happy grilling!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!