Have you ever wanted to own a stylish bell-shaped skirt but couldn't find the perfect one in stores? Look no further! In this step-by-step guide, we will teach you how to sew your very own bell-shaped skirt. You don't need to be an expert seamstress to complete this project, as it is suitable for beginners as well. So let's get started!

Materials Needed

  • Fabric of your choice
  • Scissors
  • Tape measure
  • Pins
  • Sewing machine or needle and thread
  • Elastic band
  • Iron
  • Safety pin

Step 1: Taking Measurements

Measure your waist and hips using a tape measure. Write down these measurements as we will need them for cutting the fabric.

Step 2: Cutting the Fabric

Take your fabric and fold it in half lengthwise. This will give you two layers of fabric. Now, measure and mark the waist measurement from the folded edge. Measure and mark the hip measurement a few inches below the waist measurement. Connect these markings by drawing a smooth curve.

Next, measure and mark the desired length of your skirt from the waist down. Mark the hemline with pins.

Step 3: Sewing the Side Seams

With right sides facing each other, pin and stitch the side seams of the skirt using a sewing machine or needle and thread. Remember to leave an opening at the top for inserting the elastic band.

Step 4: Creating the Waistband

Fold the top edge of the skirt about 1 inch towards the wrong side and press it with an iron. Fold it over once more to create a casing for the elastic band. Pin the folded edge in place and stitch along the bottom edge of the casing, leaving a small opening to insert the elastic band.

Step 5: Inserting the Elastic Band

Using a safety pin, attach one end of the elastic band and thread it through the casing. Make sure to hold the other end of the elastic band so that it doesn't get pulled through. Once the elastic band has gone all the way around the waist, overlap the ends by an inch and stitch them securely together. Sew the opening of the casing closed.

Step 6: Hemming the Skirt

Try on the skirt and adjust the length if necessary. Once you are satisfied, fold the bottom edge of the skirt towards the wrong side and press it with an iron. Then, fold it over again and pin the hem in place. Stitch along the folded edge to secure the hem.

Step 7: Final Touches

Give your freshly sewn bell-shaped skirt a good press with an iron to smooth out any wrinkles. Trim off any loose threads, and voila! Your DIY bell-shaped skirt is complete!

Now you can show off your new creation and enjoy the compliments that come your way. Feel free to experiment with different fabrics and patterns to create a skirt that suits your style perfectly. Happy sewing!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!