39 
0 
Having trouble with your DIRECTV remote control? Is it unresponsive or not working properly? Don’t worry, a simple reset might just solve the issue. In this step-by-step guide, we will walk you through the process of resetting your DIRECTV remote control.
Step 1: Remove the Batteries
Start by removing the batteries from the back of your remote control. This will effectively cut off any power supply to the remote and allow it to reset completely.
Step 2: Press and Hold the Mute and Select Buttons
With the batteries removed, press and hold the Mute and Select buttons simultaneously for about 5 seconds. You should see a green light on the remote control blink twice. This indicates that the remote is ready for the next step.
Step 3: Enter the Code
Using the number keypads on your remote control, enter the code “981”. The green light will blink twice again, confirming that the code has been entered successfully.
Step 4: Test the Remote
Place the batteries back into the remote control and point it towards your DIRECTV receiver or TV. Press any button on the remote to see if it is functioning properly. If it doesn’t work, try replacing the batteries with a fresh set and repeat the previous steps.
Step 5: Activate RF Mode (Optional)
If you prefer to use your remote control in RF (radio frequency) mode instead of IR (infrared) mode, follow these additional steps. Make sure that your receiver is turned on and connected to the TV.
a. Go to the MENU on your remote control by pressing the MENU button.
b. Select SETTINGS & HELP using the arrow keys.
c. Choose SETTINGS.
d. Navigate to REMOTE CONTROL, then select SET REMOTE CONTROL.
e. Choose one of the options: RF, IR/RF, or IR.
f. Follow the on-screen instructions to complete the setup.
Step 6: Contact DIRECTV Support (if necessary)
If the remote control is still not working after following the above steps, it is advisable to contact DIRECTV support for further assistance. They have a dedicated team of experts who can help troubleshoot and resolve any issues you may be facing with your remote control.
Remember, resetting your remote control is a simple and effective way to troubleshoot most common issues. However, if the problem persists, it could indicate a more serious problem with the remote control or the receiver itself.
In conclusion, by following this step-by-step guide, you can easily reset your DIRECTV remote control and potentially resolve any issues you are experiencing. Remember to check the batteries, enter the code correctly, and test the remote control after the reset. If needed, you can also activate RF mode or seek assistance from DIRECTV support. With a properly functioning remote control, you can enjoy uninterrupted entertainment in the comfort of your home.
0 | 
0