Are you facing issues with the partial mileage counter on your Panda and need to reset it? Look no further! In this step-by-step guide, we will walk you through the process of resetting the partial mileage counter on your Panda. Follow these simple instructions to solve this problem:

Step 1: Accessing the Instrument Cluster

The first step is to locate the instrument cluster in your Panda. It is usually located behind the steering wheel. Once you have located it, follow these steps:

  • Turn off the Panda’s engine and remove the key from the ignition.
  • Make sure the car is in park mode and the handbrake is engaged.
  • Use a screwdriver to carefully remove the screws holding the instrument cluster cover in place.
  • Gently remove the cover to gain access to the instrument cluster.

Step 2: Resetting the Partial Mileage Counter

Now that you have access to the instrument cluster, follow these steps to reset the partial mileage counter:

  • Locate the partial mileage counter on the cluster. It is usually a small button labeled “P. Miles” or something similar.
  • Press and hold the button for approximately 10 seconds.
  • Release the button when the mileage counter resets to zero or shows dashes (- – -).

Step 3: Reassembling the Instrument Cluster

After resetting the partial mileage counter, it’s time to reassemble the instrument cluster. Follow these instructions:

  • Align the instrument cluster cover with the cluster and gently press it back into place.
  • Reinsert the screws and tighten them with a screwdriver.
  • Ensure the cover is securely fitted and there are no loose parts.

And that’s it! You have successfully reset the partial mileage counter on your Panda. Take your car for a test drive to ensure the counter remains reset. If you encounter any issues, always consult your car’s manual or seek professional assistance.

Remember, resetting the partial mileage counter may not affect the overall odometer reading or alter the accuracy of your Panda’s mileage tracking system. This only resets the counter that tracks the distance covered since the last reset.

We hope this step-by-step guide has been helpful to you. Stay tuned for more vehicle maintenance tips and tricks.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!