Have you ever wondered how to stop your rear windshield wipers? It can be frustrating when they keep swiping back and forth, especially when you don’t need them. Fortunately, there are some tips and tricks you can follow to turn off those rear windshield wipers. Below, we have compiled a list of effective methods to help you put a stop to those pesky wipers.

Method 1: Locate and Turn Off the Rear Wiper Switch

The most straightforward way to stop rear windshield wipers is to locate the rear wiper switch inside your vehicle. The switch is typically found on the dashboard or the steering column. Once you find it, simply switch it to the “off” position, effectively stopping the rear wipers from moving.

Method 2: Check Your Owner’s Manual

If you’re having trouble finding the rear wiper switch, referring to your vehicle’s owner’s manual can be helpful. The manual will have detailed information on how to locate and operate the rear wiper switch, specific to your car’s make and model. This method ensures you’re following the manufacturer’s recommended procedures.

Method 3: Remove the Rear Wiper Fuse

If the above methods do not work or you prefer a more direct approach, you can remove the rear wiper fuse. Follow these steps:

  • Consult your vehicle’s owner’s manual or fuse box diagram to locate the rear wiper fuse. Usually, the fuse box is located under the dashboard or in the engine compartment.
  • Use a pair of needle-nose pliers or a fuse puller tool to carefully remove the rear wiper fuse.
  • Inspect the fuse to confirm it’s the correct one, as fuse boxes may contain several fuses for various functions.
  • Once you’ve confirmed it’s the appropriate fuse, firmly put it aside or replace it with a spare fuse if needed.

By removing the rear wiper fuse, you completely disable the rear wipers until the fuse is reinserted.

Method 4: Disconnect the Rear Wiper Motor

If you want a more permanent solution to stopping your rear windshield wipers, you can consider disconnecting the rear wiper motor. However, this method should only be used as a last resort or if you don’t intend to use the rear wipers again.

To disconnect the rear wiper motor:

  • Open the rear hatch or trunk of your vehicle to access the rear wiper assembly from the inside.
  • Locate the rear wiper motor, which is typically positioned near the base of the rear wiper arm.
  • Detach the electrical connector that is connected to the rear wiper motor. This will eliminate power to the motor and prevent the wipers from functioning.
  • Remember, disconnecting the rear wiper motor permanently disables the rear wiper functionality.

Stopping your rear windshield wipers can be easily achieved by following one of the methods mentioned above. Whether you prefer disabling them temporarily through the switch or removing the fuse for a more extended period, always be cautious and consult your vehicle’s owner’s manual when dealing with electrical components.

Remember, it’s essential to assess your needs before deciding to disconnect the rear wiper motor permanently. Taking the time to explore these options will ultimately help you achieve a more comfortable and convenient driving experience.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!