Gather the Necessary Tools
Before you begin, make sure you have the following tools ready:
- Measuring tape
- Pins
- Scissors
- Matching thread
- Sewing machine or needle
Measure and Mark the Desired Length
Put on the jeans and fold the excess fabric up to the desired length. Use the measuring tape to ensure that both legs are folded evenly. Once you’re satisfied with the length, secure the fold with pins or fabric chalk.
Prepare for Sewing
Remove the jeans and lay them flat on a table. Carefully remove the pins and unfold the fabric. Trim the excess fabric, leaving an additional 1-2 inches for folding and sewing the hem.
Create the Hem
With the excess fabric still unfolded, fold it over by about ½ an inch and press it down firmly with an iron. Then, fold it over again to match the desired length. Pin the hem in place, ensuring it is even on both legs.
Time to Sew
Using a sewing machine or a needle and thread, carefully stitch along the bottom edge of the folded hem. Use a matching thread color to make the stitches blend in. Remember to secure the beginning and end of the stitching with knots.
Final touches
Once you’ve finished sewing, remove any loose threads and press the newly created hem with an iron to give it a polished look. Try on the jeans to ensure the length is just right, and make any necessary adjustments if needed.
Congratulations, You’re Done!
Shortening jeans by hand is not as daunting as it may seem. With a little patience and practice, you can confidently tackle this DIY task. Now go ahead and enjoy your perfectly fitting jeans!
We hope this step-by-step guide has helped you learn how to shorten jeans by hand. Remember, always take your time and be cautious when handling scissors and sewing tools. Happy DIYing!