If you are encountering issues with your Fritz Box 7490 modem, resetting it might be the solution to resolve any technical glitches. Resetting the modem can help refresh its settings and potentially fix any connectivity issues you’re facing. In this step-by-step guide, we will walk you through the process of resetting your Fritz Box 7490 modem. Let’s get started!

Step 1: Locate the Reset Button

The first step is to locate the reset button on your Fritz Box 7490 modem. You can typically find it on the back or bottom of the modem. It is usually a small, recessed button that requires a pin or paperclip to press.

Step 2: Prepare a Pin or Paperclip

Before proceeding with the reset process, grab a pin or a paperclip. You’ll need this to press the reset button in the next step.

Step 3: Power Off the Modem

Make sure to turn off the power supply to your Fritz Box 7490 modem. This is crucial before performing a reset.

Step 4: Reset the Modem

Using the pin or paperclip, press and hold down the reset button for approximately 10 seconds. You may need to use a bit of force to engage the button properly.

Step 5: Wait for the Modem to Restart

Once you release the reset button, the Fritz Box 7490 modem will begin to restart automatically. This process usually takes a couple of minutes, so be patient and let it complete before moving on to the next step.

Step 6: Configure the Modem

After the modem has finished restarting, you will need to reconfigure it to establish a new network connection. Use your computer or smartphone to connect to the default Wi-Fi network (SSID) provided by the modem.

Step 7: Access the Web Interface

Once connected to the default Wi-Fi network, open a web browser and type “fritz.box” in the address bar. This will take you to the modem’s web interface.

Step 8: Follow the Setup Wizard

Follow the on-screen instructions in the setup wizard to configure your modem’s network settings, including your ISP (Internet Service Provider) credentials, wireless network settings, and any other preferences you have.

Step 9: Test Your Connection

After completing the setup wizard, it’s time to test your connection. Make sure all your devices are connected to the modem’s Wi-Fi network and check if you have internet access. If everything is working fine, congratulations! You have successfully reset and reconfigured your Fritz Box 7490 modem.

Resetting the Fritz Box 7490 modem can often be an effective solution for resolving connectivity issues. By following this step-by-step guide, you’ll be able to reset and reconfigure your modem easily. However, keep in mind that resetting your modem will revert all settings back to their default, so it is important to have any required configuration details, such as your ISP credentials, handy before resetting. We hope this guide has been helpful in resolving your modem-related concerns.

  • Step 1: Locate the Reset Button
  • Step 2: Prepare a Pin or Paperclip
  • Step 3: Power Off the Modem
  • Step 4: Reset the Modem
  • Step 5: Wait for the Modem to Restart
  • Step 6: Configure the Modem
  • Step 7: Access the Web Interface
  • Step 8: Follow the Setup Wizard
  • Step 9: Test Your Connection
Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0
Vota per primo questo articolo!