Is your Folletto VK 150 electrical cable damaged or not working properly? Don’t worry, replacing it is easier than you might think. In this step-by-step guide, we will show you how to replace the electrical cable of your Folletto VK 150 vacuum cleaner. Follow these instructions carefully to ensure a safe and successful replacement.

Gather the Necessary Tools

Before starting the replacement process, make sure you have the following tools:

  • Phillips screwdriver
  • Wire strippers
  • Electrical tape
  • Replacement cable (compatible with Folletto VK 150)

Unplug and Disassemble the Vacuum Cleaner

For safety, always unplug your Folletto VK 150 from the power source before working on it. Then, follow these steps to disassemble the vacuum cleaner:

  1. Remove the canister by pressing the release button.
  2. Remove the filter lid and take out the filter.
  3. Using a Phillips screwdriver, remove the screws that hold the cover in place.
  4. Gently lift off the cover and set it aside.

Disconnect the Old Electrical Cable

Before connecting the new cable, you need to disconnect the old one. Follow these steps:

  1. Locate the electrical cable on the inside of the vacuum cleaner.
  2. Using wire strippers, carefully strip the insulation off the ends of the old cable.
  3. Unscrew the connectors that hold the old cable in place.
  4. Remove the old cable from the vacuum cleaner.

Connect the New Electrical Cable

Now it’s time to connect the new electrical cable. Follow these steps:

  1. Take the replacement cable and feed it through the cable entry hole in the vacuum cleaner’s body.
  2. Strip the insulation off the ends of the new cable using wire strippers.
  3. Attach the connectors to the stripped ends of the new cable.
  4. Screw the connectors securely to ensure proper electrical contact.

Reassemble the Vacuum Cleaner

Once you have connected the new electrical cable, it’s time to reassemble your Folletto VK 150 vacuum cleaner. Follow these steps in reverse order:

  1. Place the cover back on the vacuum cleaner.
  2. Using the Phillips screwdriver, reattach the screws to secure the cover.
  3. Insert the filter back into the filter lid and put it in place.
  4. Reattach the canister by sliding it into position until it clicks.

Test and Safety Precautions

Once you have reassembled your Folletto VK 150 vacuum cleaner, plug it into a power source and test if the new electrical cable is working properly. It is crucial to ensure there are no loose connections or exposed wires before using the vacuum cleaner.

Remember to follow all safety precautions while working with electrical devices. If you are unsure or uncomfortable with any step of the process, it’s always best to consult a professional.

By following this step-by-step guide, you will be able to replace the electrical cable of your Folletto VK 150 vacuum cleaner with ease. Enjoy your vacuuming experience with a fully functional electrical cable!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!