Silicone is a widely used sealant in bathrooms due to its water-resistant properties. However, over time, it can collect mold and grim that can be difficult to remove. If you’re remodeling or just updating the look of your bathroom, you may want to remove the old silicone and apply new one. Fortunately, removing silicone from bathroom tiles is not as difficult as it may seem. In this article, we will provide you with a step-by-step guide on how to do it.

1. Gather your materials

To remove silicone from bathroom tiles, you need a few tools such as a utility knife, a silicone sealant remover, a scraper, a pair of gloves, and a sponge. It’s important to protect your hands with the gloves as the sealant remover can be harsh on the skin.

2. Cut the silicone

Using the utility knife, carefully cut the silicone sealant along its length so you can easily remove it in sections. Make sure to apply light pressure to avoid damaging the wall or tile. It’s important to note that the silicone sealant will be easier to cut when it’s dry. Therefore, it’s better to do this process after not using the shower or bath for at least 24 hours.

3. Apply the silicone sealant remover

Once you’ve cut out most of the silicone, it’s time to apply the silicone sealant remover to soften the remaining sealant. You can buy a silicone sealant remover from a hardware store or online. Read the instructions carefully before applying them to the affected area. Some sealant removers come in the form of gel, so you need to apply it onto the silicone and let it sit for a certain amount of time to soften the sealant.

4. Scrape the softened sealant

Once you’ve left the sealant remover to soften the sealant, use the scraper to gently remove the loosened sealant. Apply light pressure to avoid damaging the tiles. You may need to reapply the sealant remover and repeat the process to remove all the sealant.

5. Clean the tiles

After you’ve removed all the sealant, clean the tiles with a sponge and warm water. Make sure to remove the remnants of the sealant remover as well. If there’s any remaining residue on the surface, you can use a solution of white vinegar and water.

6. Wait for it to dry

After cleaning, it’s important to wait for the area to fully dry before applying new silicone. The sealant needs to be applied onto a dry surface for it to bond properly. Wait for at least 24 hours to ensure the tiles are completely dry and ready to be resealed.

7. Reapply the silicone

Once the area is completely dry, it’s time to reapply the silicone sealant. Follow the instructions carefully and apply the sealant evenly. You can use a caulking gun or a squeeze tube for a precise application.

In conclusion, removing silicone from bathroom tiles is a task that you can do yourself. It’s important to have the right tools and materials to make the process effective. Remember to be careful when using the utility knife and scraper to avoid damaging the tiles. Once you’ve removed the old silicone, clean the tiles properly and wait for them to dry before applying new sealant. With proper care, you can have a clean and fresh-looking bathroom that’s free from mold and grim.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!