If you own a Rolex Datejust watch, you may be wondering how to change or remove the strap. While Rolex watches are known for their sturdy and reliable construction, opening the strap can be a little tricky if you’re not familiar with the process. In this step-by-step guide, we will walk you through the process of opening the strap of a Rolex Datejust, so you can easily change it whenever you want.

Step 1: Gather Your Tools

Before you begin, make sure you have all the necessary tools ready. To open the strap of a Rolex Datejust, you will need a spring bar tool, a small precision screwdriver, and a soft cloth to protect the watch.

Step 2: Start with the Right Side

Locate the small pinhole on the right side of the watch lugs. This is where the spring bar is placed to secure the strap. Insert the spring bar tool or the small precision screwdriver into the pinhole and gently apply pressure to push the spring bar inwards.

Step 3: Release the Spring Bar

While applying pressure on the spring bar, use your other hand to gently pull the strap away from the watch lugs. As you continue to apply pressure, the spring bar will release, and you can easily detach the strap from the watch.

Step 4: Repeat for the Other Side

Once you have successfully removed one side of the strap, repeat the same process on the other side. Locate the pinhole on the left side of the watch lugs and insert the spring bar tool or small precision screwdriver to release the spring bar. Gently pull the strap away from the watch lugs until it detaches.

Step 5: Replace the Strap

If you want to change the strap, now is the perfect time to do so. Simply align the new strap with the watch lugs and insert one end into the pinhole. Press the spring bar inwards while sliding the strap into place. Repeat the process on the other side of the watch, and you’re all set with a new strap.

Step 6: Double-Check Your Work

Once you have replaced the strap, double-check that it is securely attached to the watch lugs. Gently tug on the strap to ensure it is properly in place. Avoid pulling too hard as it may damage the watch or the strap.

Opening the strap of a Rolex Datejust is a relatively simple process once you know the correct steps. By following this step-by-step guide, you can safely remove the strap and replace it with a new one whenever you desire. Always make sure to handle your Rolex watch with care and avoid using excessive force during the strap changing process.

  • Gather the necessary tools: spring bar tool, small precision screwdriver, soft cloth
  • Locate the pinhole on the right side and apply pressure to release the spring bar
  • Detach the strap from the watch lugs
  • Repeat the process for the left side of the watch
  • Align and insert the new strap, pressing the spring bar inwards
  • Ensure the strap is securely attached and double-check your work

With these easy steps, you can confidently open the strap of your Rolex Datejust and enjoy the flexibility of changing straps to match your style or occasion.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!