If you are a proud owner of the Huawei P Smart smartphone, you may find yourself in a situation where you need to open the device for various reasons. Whether you want to replace a damaged component, upgrade your storage, or simply satisfy your curiosity, this comprehensive guide will walk you through the process step-by-step. So, let’s get started!

Before You Begin

  • Ensure your smartphone is powered off before attempting to open it.
  • Gather the necessary tools for the task, including a small Phillips screwdriver, a suction cup, and a plastic opening tool.
  • Take precautions to avoid static electricity by using an anti-static wrist strap or touching a grounded metal object before handling any internal components.

Removing the Back Cover

The back cover of the Huawei P Smart is not secured with screws or adhesive. Simply follow these steps to remove it:

  1. Insert your fingernail or a plastic opening tool into the small gap between the back cover and the rest of the device, preferably near the charging port.
  2. Gently work your way around the edges, applying slight pressure, to gradually release the clips holding the back cover in place.
  3. Once all the clips are released, carefully lift off the back cover.

Accessing Internal Components

After removing the back cover, you will gain access to the internal components of your Huawei P Smart. Here, we will guide you through opening the device further to reach certain elements.

Removing the Battery

  1. Locate the battery connector on the motherboard, usually marked as “BAT”.
  2. Use a plastic opening tool or your fingernail to lift the connector gently, disconnecting the battery from the motherboard.
  3. Once disconnected, you can safely remove the battery from its compartment.

Replacing the Display

If you need to replace the display due to damage or any other reason:

  1. Disconnect the battery as described in the previous section.
  2. Locate and remove the screws around the display’s frame using a small Phillips screwdriver.
  3. Use a suction cup to lift the display slightly, creating a small gap.
  4. Insert a plastic opening tool into the gap and carefully separate the display from the rest of the device.
  5. Once the display is free, disconnect the ribbon cables connecting it to the motherboard.
  6. You can now replace the display with a new one and reassemble the device by following the steps in reverse.

Opening the Huawei P Smart may seem like a daunting task, but with the right tools and careful approach, it can be accomplished without any issues. Remember to handle the internal components with care and follow the steps mentioned in this guide. Whether you’re replacing a component or exploring the inner workings of your smartphone, patience and precision are key!

Disclaimer: Opening your Huawei P Smart smartphone may void your warranty. Proceed with caution and only if you feel confident in your abilities. If you are unsure or uncomfortable with performing these actions yourself, it is best to seek professional assistance.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!