Elephant bell-bottom pants, also known as elephant pants, flare pants, or bell-bottoms, are a trendy fashion choice that originated in the 1960s and have since made a comeback in recent years. These pants are characterized by their wide, flared bottoms that resemble the shape of an elephant’s leg. If you want to make your own pair of elephant bell-bottom pants, follow these step-by-step instructions.

Materials you will need:
– Fabric of your choice (preferably with a good drape and stretch)
– Sewing machine
– Scissors
– Thread
– Elastic band
– Pins
– Iron

Step 1: Take Measurements
To make a pair of elephant bell-bottom pants that fit you perfectly, it’s essential to take accurate measurements. Measure your waist, hips, inseam, and the desired length of the pants. These measurements will help you determine the amount of fabric you’ll need and help you draft a pattern.

Step 2: Draft the Pattern
Using your measurements, create a pattern on a large piece of paper or directly on the fabric. Start with a basic pants pattern, and then gradually widen the legs as you move down towards the hemline. The flare should start a few inches below the knee, gradually increasing in width as it reaches the hemline. Use a ruler or a curved ruler to ensure smooth and accurate lines.

Step 3: Cut and Prepare the Fabric
Place your pattern on the fabric and cut out two sets of identical pieces, one for the front and one for the back of the pants. Make sure to include seam allowances in your pattern. Once cut out, iron the fabric to remove any creases or wrinkles.

Step 4: Sew the Inner Leg Seams
Fold one set of fabric pieces in half, matching the inner leg seams. Pin them together and sew from the crotch to the hemline on both the front and back pieces. Repeat the same process for the other set of fabric pieces.

Step 5: Sew the Outer Leg Seams
With the right sides facing each other, pin the front and back pieces together along the outer leg seams. Make sure the inner leg seams match perfectly. Sew from the waistline to the hemline on both sides.

Step 6: Create the Waistband
Fold the waistline of the pants over by around 2 inches, leaving enough space to insert the elastic band. Iron the fold to create a clean crease. Pin the folded-over edge in place, leaving a small opening at one end to insert the elastic. Sew the waistband, making sure to leave the opening.

Step 7: Insert the Elastic Band
Cut a piece of elastic to your waist measurement plus an extra inch. Attach a safety pin to one end of the elastic and thread it through the waistband. Once you reach the opening, sew the ends of the elastic together securely and close the opening.

Step 8: Hem the Bottoms
Try on the pants and determine the desired length. Fold the hemline over by about 1 inch and iron it to create a clean hem. Pin it in place and sew all the way around the hem to secure it.

Step 9: Finish the Pants
Give the pants a final press with an iron to smooth out any wrinkles or creases. Trim any loose threads and if desired, add any additional embellishments, such as pockets or embroidery.

With these steps, you can create your very own pair of stylish elephant bell-bottom pants. Experiment with different fabrics, patterns, and lengths to customize your pants to your personal style. So, grab your sewing machine and get ready to rock this funky fashion trend!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!