What You’ll Need:
- A tablecloth
- Fabric for the border
- Matching thread
- Sewing machine or needle
- Pins
- Fabric scissors
- Iron and ironing board
Step 1: Measure and Cut
Start by measuring the length you want to add to your tablecloth. Next, cut the fabric for the border according to this measurement. Make sure the width of the fabric is sufficient to create a border of your desired width.
Step 2: Iron and Prep
Iron the fabric for the border to remove any wrinkles. Lay your tablecloth flat on the floor or a large table. Fold the raw edge of the border fabric and iron it to create a clean edge.
Step 3: Pin and Secure
Pin the folded and ironed edge of the border fabric to the bottom edge of the tablecloth. Start by pinning the corners and then add pins along the sides. Ensure that the border aligns perfectly with the tablecloth’s edge.
Step 4: Sew It Together
Using a sewing machine or needle, sew along the folded edge of the border fabric, attaching it to the tablecloth. Remove the pins as you go. Make sure to sew with a straight stitch and backstitch at the beginning and end to secure the seam.
Step 5: Trim and Finish
Trim any excess fabric from the border, leaving a small allowance if desired. Once the sewing is complete, iron the tablecloth and border to set the seam and give it a polished look. Your lengthened tablecloth with a beautiful border is now ready to be showcased!
With this easy-to-follow guide, you can now lengthen your tablecloth with a border and transform it into a stylish piece for any occasion. Get creative with different fabric choices and add a personal touch to your dining table setup. Enjoy your newly lengthened tablecloth!