Wallpaper is a great way to add a new look to wallpaper-stripes-2″ title=”How to remove wallpaper stripes”>remove–wallpaper–stripes” title=”How to remove wallpaper stripes”>remove–wallpaper” title=”How to remove wallpaper”>your room, but first, you need to hang it correctly. Hanging can be a daunting task for many people, but with the right tools and technique, it can be done easily. Here’s how to hang stripes” title=”How to remove wallpaper stripes”>wallpaper in seven easy steps:

1. Gather your supplies
Before you begin, make sure you have all the necessary tools and supplies. You’ll need wallpaper, wallpaper paste, a wallpaper brush or roller, a broad knife or putty knife, a seam roller, a straight edge, a ruler or tape measure, a pencil, a level, and a ladder or step stool. It’s also good to have a drop cloth or old sheet to protect your floors.

2. Measure your wall
Measure the width and height of the wall, taking into account any doors, windows, or other features. This will determine how much wallpaper you need to purchase. Be sure to add a few extra inches to your measurements to allow for trimming and overlapping.

3. Prepare the wall
Before applying the wallpaper, you need to clean the wall and make any necessary repairs. Fill in any holes or cracks with spackling compound, let it dry, and sand it smooth. If you’re applying wallpaper over existing wallpaper, any loose pieces and sand any rough spots. Finally, wipe the wall with a damp cloth or sponge to plaster-and-wooden–panels” title=”How to remove wallpaper from plaster and wooden panels”>plaster-and-wooden–panels” title=”How to remove wallpaper from plaster and wooden panels”>remove any dust or dirt.

4. Cut the wallpaper
Measure and cut the wallpaper to the correct length, adding a few extra inches to the top and bottom. This will allow you to trim the excess after the wallpaper is hung. Be sure to match the pattern if the wallpaper has one.

5. Apply the paste
Follow the instructions on the wallpaper paste package to mix the paste. Then, use a wallpaper brush or roller to apply the paste to the back of the wallpaper, making sure to cover the edges and corners.

6. Hang the wallpaper
Start at the top of the wall and use a level to draw a straight line as a for the first strip of wallpaper. Align the edge of the wallpaper with the guide line, and smooth it out from top to bottom, using a broad knife or putty knife to remove air bubbles. Repeat this process for each strip of wallpaper, making sure to match the pattern and smooth out any bubbles or wrinkles.

7. Trim the excess
Use a straight edge and a sharp utility knife to trim the excess wallpaper at the top and bottom of the wall. Use a seam roller to draw the seams together and smooth out any rough edges.

Hanging wallpaper may seem like a daunting task, but with a little patience and the right tools, you can do it yourself. Just remember to measure carefully, follow the instructions, and take your time. With a little practice, you’ll be a pro at hanging wallpaper in no time!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!