In today’s world, USB memory units are one of the most commonly used devices to store and transfer data. But sometimes, you may encounter issues with your USB device, and it may refuse to work appropriately. The most likely solution to fix this issue is to format your USB memory unit. Formatting your USB memory unit can help remove unwanted malware or viruses, fix errors, and make the device work again.

Different types of operating systems offer different methods to format a USB memory unit. However, one of the most straightforward methods to format a USB memory unit is by using the command prompt. If you’re not familiar with the command prompt, don’t fret; this article provides step-by-step instructions on how to format a USB memory unit using the command prompt.

Step 1: Insert your USB memory unit into your computer

Before you start formatting your USB memory unit using the command prompt, ensure that you plug the USB memory unit into any available USB port on your computer.

Step 2: Open the command prompt

To open the command prompt on your computer, press ‘Windows+ R’ keys at the same time, type ‘cmd’ in the ‘Run’ box, and click ‘OK’ (or press ‘Enter’).

Step 3: Identify the drive letter of your USB memory unit

Once the command prompt window opens, type ‘diskpart’ and press ‘Enter.’ Next, type ‘list disk’ and press ‘Enter.’ A list of all the connected storage devices, including your USB memory unit, will appear. Identify the device with its corresponding name and size, and note its drive letter.

Step 4: Select your USB memory unit

To select your USB memory unit, type ‘select disk X,’ where ‘X’ is the drive letter assigned to your USB memory unit. Then press ‘Enter.’

Step 5: Clean the disk

Once your USB memory unit is selected, type ‘clean’ and press ‘Enter.’ This process wipes out all the data on the USB memory unit, and it can’t be recovered. Be sure that you’ve backed up all important data on the USB memory unit to avoid data loss.

Step 6: Create a partition

After you’ve cleaned the USB memory unit, the next step is to create a new partition. To do this, type ‘create partition primary’ and press ‘Enter.’ This creates a primary partition on your USB memory unit.

Step 7: Format the USB memory unit

Now it’s time to format your USB memory unit. To do this, type ‘format fs=ntfs quick’ and press ‘Enter.’ This command formats the USB memory unit to NTFS file system swiftly. You can replace the ‘ntfs’ parameter with ‘fat32’ or ‘exfat’ based on the system requirements.

Step 8: Assign a letter to the USB memory unit

Finally, assign a letter to the USB memory unit. To accomplish this, type ‘assign letter=X,’ where ‘X’ represents the letter you want to assign to your USB memory unit.

That’s it! You’ve successfully formatted your USB memory unit using the command prompt. It’s essential to note that formatting a USB memory unit using the command prompt is a quick and easy process. And it guarantees that your USB memory unit is free of any viruses and malware that may have affected it.

In conclusion, there are various methods for formatting your USB memory unit, but using the command prompt is the easiest and quickest way to do it. Through this guide, you can quickly and efficiently format your USB memory unit without any hassle. So go ahead and format your USB memory unit if you’re facing any issues with it.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!