How To Fix The Problem When The Dryer Won't Turn On

When your dryer suddenly refuses to turn on, it can be quite frustrating and inconvenient. However, before rushing to call a repair service, there are a few troubleshooting steps you can take to potentially fix the issue on your own. In this article, we will discuss some common reasons why your dryer won’t turn on and offer effective solutions to get it up and running again.

1. Check the Power Supply – The first step is to ensure that your dryer is properly connected to a power source. Check if the power cord is securely plugged into the outlet and there are no loose wires. Also, verify that the outlet is working by plugging in another device. If the outlet is dead, consider resetting the circuit breaker or replacing the fuse.

2. Examine the Door Switch – Dryers often have a door switch that must be engaged for the machine to start. Carefully inspect the door switch to see if it is damaged, broken, or stuck in an open position. If it appears to be faulty, you might need to replace it.

3. Test the Thermal Fuse – A thermal fuse is a safety component that protects the dryer from overheating. If it blows, the dryer won’t turn on. Locate the thermal fuse and use a multimeter to check its continuity. If there is no continuity, it has likely blown out and needs to be replaced.

4. Inspect the Start Switch – The start switch is responsible for initiating the drying cycle. If it is defective, the dryer won’t start. Access the switch and use a multimeter to test its continuity. If there is no continuity when the switch is pressed, it may be defective and require a replacement.

5. Verify the Drive Belt – In some cases, a broken or worn-out drive belt can prevent the dryer drum from spinning, causing the unit not to turn on. Open the dryer and check the condition of the drive belt. If it appears frayed, cracked, or broken, replace it with a new one.

6. Clean the Lint Filter and Vent – An excessively clogged lint filter or vent can impede proper airflow and cause the dryer to overheat, triggering a safety feature that shuts it down. Remove the lint filter and give it a thorough cleaning. Additionally, inspect the vent hose and remove any lint or debris that may be blocking it.

7. Reset the Control Board – Over time, electronic control boards can develop glitches, causing the dryer to malfunction. Turn off the dryer and unplug it from the power source for a few minutes. Then, plug it back in and try turning it on again. This simple reset may resolve the issue.

8. Seek Professional Help – If you have exhausted all possible solutions and your dryer still won’t turn on, it may be time to call a professional appliance repair service. They have the expertise to diagnose and solve complex issues in a dryer.

In conclusion, a non-functioning dryer can disrupt your daily routine, but before panicking, it is important to troubleshoot the problem. Check the power supply, door switch, thermal fuse, start switch, drive belt, lint filter, and vent for any issues. Try resetting the control board as well. If all else fails, consult a professional to ensure a proper diagnosis and repair. With some patience and determination, you may be able to fix the problem and have your dryer functioning normally again.