A slow draining toilet can be an annoying problem that can cause a lot of inconvenience in your bathroom. It can lead to backups, smells, and even cause your toilet to overflow. However, the good news is that fixing a toilet with a slow drain is relatively easy, and you can do it on your own. This article will provide you with the steps to follow when fixing a toilet with a slow drain.

Identify the cause of the problem

Before fixing a slow draining toilet, it is crucial to identify the cause of the problem. A slow-draining toilet can be caused by various things, including a blockage in the drain, a clogged drainpipe, low water levels in the tank, or a malfunctioning flushing mechanism. Once you have identified the cause of the problem, fixing the problem becomes easier.

Clear the clog

If the slow drain is due to a blockage in the drain, the first step to fixing the problem is to clear the clog. You can do this by using a plunger, which is a tool that creates suction and pushes water down the drain. To use a plunger, fill the toilet bowl with enough water to cover the suction cup, place the plunger over the drain, and push and pull the plunger repeatedly until the drain clears.

If the clog persists, you can use a toilet auger, which is a tool that is designed to clear obstructions in the toilet’s drainpipe. Insert the auger into the drain, and turn the crank to push the snake into the drain. Once you reach the clog, the auger should break it up and allow the water to drain out. If you’re not comfortable using a toilet auger, you can hire a professional plumber to do the job for you.

Adjust the tank water level

If the slow drain is due to low water levels in the tank, adjusting the water level is an easy fix. To do this, locate the fill valve in the back of the toilet tank and adjust the float to increase the water level. Ensure that the water level is not too high as this can cause the toilet to overflow.

Check the flushing mechanism

If the slow drain is due to a malfunctioning flushing mechanism, you need to check the flushing mechanism to determine the problem. The flushing mechanism consists of the handle, flapper, and flush valve. Start by checking the handle and the chain that connects it to the flapper. Ensure that the chain is not too loose or too tight as this can prevent the flapper from opening and closing properly.

Next, check the flapper to see if it’s damaged or worn out. A damaged or worn-out flapper can prevent water from flowing properly, causing slow draining toilets. If the flapper is damaged, replace it with a new one.

Finally, check the flush valve to see if it’s clogged or dirty. Clean the flush valve thoroughly, and if necessary, replace it with a new one.

Conclusion

A slow draining toilet can be frustrating, but it’s easy to fix. The key is to identify the cause of the problem and take the necessary steps to fix it. Whether it’s clearing a clog, adjusting water levels, or fixing the flushing mechanism, a little DIY from the internet can go a long way to fixing your slow draining toilet without calling a professional.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!