If you have a broken screen on your Android device, you may think that enabling USB debugging is impossible. However, fear not! There are a few methods that can help you enable USB debugging even with a broken screen. In this article, we will guide you through the process.
Method 1: Using an OTG Adapter
If your device supports USB On-The-Go (OTG), you can use an OTG adapter to connect a USB mouse to your phone. Follow these steps:
- Connect your USB mouse to the OTG adapter.
- Connect the OTG adapter to your Android device.
- You should now see a cursor on your screen controlled by the USB mouse.
- Navigate to the Settings app using the USB mouse.
- Scroll down and tap on “About phone” or “About device”.
- Look for the “Build number” and tap on it multiple times (usually 7 times) until you see a message saying you have enabled developer options.
- Go back to the main settings screen and you should now see “Developer options” listed.
- Tap on “Developer options”.
- Scroll down and find “USB debugging”.
- Check the box next to “USB debugging” to enable it.
Method 2: Using Android Debug Bridge (ADB)
If you have previously enabled USB debugging on your device and have a computer with ADB installed, you can use this method. Follow these steps:
- Connect your Android device to the computer using a USB cable.
- Open a command prompt or terminal window on your computer.
- Type the command “
adb devices
” and press Enter. - You should see your device listed along with a unique device ID.
- Type the command “
adb shell
” and press Enter. - Type the command “
settings put global adb_enabled 1
” and press Enter.
Method 3: Using Vysor
Vysor is a handy tool that allows you to mirror and control your Android device on your computer. To use Vysor with a broken screen, follow these steps:
- Download and install the Vysor app on your computer.
- Connect your Android device to the computer using a USB cable.
- Launch Vysor on your computer.
- You should see a window displaying the screen of your Android device.
- Navigate to the Settings app using the Vysor window.
- Follow the same steps mentioned in Method 1 to enable USB debugging.
Enabling USB debugging with a broken screen might seem daunting at first, but with these methods, you can regain control of your device and access its advanced features. Give them a try and see which method works best for you!
Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo? 0Vota per primo questo articolo!