Bestway pools are an excellent alternative to costly in-ground swimming pools. They are affordable, convenient, and easy to install. However, like any other pool, you need to empty and clean your Bestway pool regularly. With the summer season coming to an end, it’s time to close your Bestway pool, and if you’re wondering how to do that, read on to find out.

Step 1: Turn off the Pump

Before emptying your Bestway pool, you need to turn off the pump. This will prevent the pump from sucking air, which can damage the motor. Turn off the pump and pull the plug out of the outlet.

Step 2: Remove the Filter

The cartridge is placed inside the pump and helps clean the water. So, before emptying the pool, you need to remove the filter cartridge. To do this, open the filter pump, and take out the filter cartridge. Use a garden hose to rinse the filter and leave it to dry for 24 hours.

Step 3: Drain the Water

Once you’ve turned off the pump and removed the filter cartridge, it’s time to drain the pool. You can do this in two ways; either by using a submersible pump or a garden hose. If you’re using a submersible pump, attach the hose to the pump and place it at the bottom of the pool. Turn on the pump, and it will drain the water.

If you’re using a garden hose, attach it to the adapter on the pool’s drain valve and let gravity do the work. Once the water level reaches the drain valve, remove the cap and let the water flow through the hose until the pool is empty.

Step 4: Clean the Pool

After draining the pool, you need to clean it thoroughly. Use a soft brush to scrub the sides of the pool, base, and walls. You can use a mild detergent to remove any dirt or stains. Rinse the pool thoroughly with water and let it dry for a few hours.

Step 5: Deflate the Pool

Once the pool is completely empty and dry, you need to it. Use an air pump or a vacuum cleaner to suck out the air. Start from the top and work your way down. Once the pool is deflated, make sure you fold it neatly and store it in a dry, cool place.

Step 6: Store the Pump and Filter

After deflating the pool, it’s time to store the pump and filter. Make sure you remove the hoses and dry them completely before storing. Store the pump and filter in a dry place away from direct sunlight to avoid any damage.

Final Thoughts

Emptying a Bestway pool might sound like a daunting task, but it’s pretty straightforward if you follow the steps mentioned above. Regular cleaning and maintenance will help prolong the life of your Bestway pool and ensure that you can enjoy it for years to come. So, go ahead and follow these steps to close your Bestway pool safely and store it neatly until next summer.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!