If you have recently subscribed to Infinity, the high-speed internet service, you’re probably excited to connect your device and experience the blazing fast speeds. In this step-by-step guide, we will walk you through the process of connecting your device to Infinity, ensuring you have a seamless internet experience.

Step 1: Check Your Package

Before you begin, confirm that your Infinity package includes a modem and router. These devices are essential for establishing a connection to the internet. If you haven’t received your modem and router, contact Infinity customer support for assistance.

Step 2: Find a Suitable Location

Now, find an ideal spot in your house to set up your modem and router. It is recommended to place them close to each other and in an open area. Keep them away from large obstructions that may hinder the Wi-Fi signal, such as thick walls or metal objects.

Step 3: Connect the Modem

Start by connecting one end of the Ethernet cable to the Ethernet port on your modem and the other end to your computer’s Ethernet port. This connection will establish a direct connection between your computer and the modem.

Step 4: Power Up the Modem

Now, plug in the power adapter provided with your modem into an electrical outlet. Once connected, the modem will start initializing and establishing a connection with your service provider. This may take a few minutes, so be patient during this process.

Step 5: Connect the Router

Take another Ethernet cable and connect one end to the Ethernet port on the modem and the other end to the WAN (Wide Area Network) port on your router. This connection will allow your router to receive internet signals from the modem.

Step 6: Power Up the Router

Plug in the power adapter of your router into an electrical outlet. Just like the modem, the router will also initialize and establish a connection with the modem. Allow a few minutes for this process to complete.

Step 7: Configure Your Wi-Fi Network

Once the router has established a connection, it’s time to configure your Wi-Fi network. Open a web browser on your computer and type in the IP address provided in the router’s manual. This will open the router’s configuration page.

Enter the admin credentials, usually found on the back of your router, to log in to the configuration page. Locate the wireless settings section and set a desired network name (SSID) and password for your Wi-Fi network. Apply the changes and wait a few moments for the router to update.

Step 8: Connect Your Device

Now, on your device (laptop, smartphone, tablet, etc.), go to the Wi-Fi settings and search for available networks. You should see the network name (SSID) you set in the previous step. Select it and enter the password when prompted. Once connected, you can enjoy Infinity’s high-speed internet connection on your device.

By following these step-by-step instructions, you can easily connect your device to Infinity and enjoy the incredible internet speeds it offers. Remember to keep your modem and router in a suitable location for optimal signal strength and to configure a secure Wi-Fi password to protect your network. If you encounter any issues, don’t hesitate to contact Infinity’s customer support for assistance.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!