So, you’ve accidentally dropped your iPhone 7 and now the glass is cracked? Don’t worry, changing the glass on your iPhone 7 is quite simple and you don’t need to spend a fortune at the repair shop. In this easy DIY guide, we will walk you through the step-by-step process of changing the glass on your iPhone 7.

What you’ll need

  • Replacement glass for iPhone 7
  • Small suction cup
  • Plastic prying tools
  • Pentalobe and Phillips screwdriver
  • Tweezers
  • Isopropyl alcohol
  • Clean lint-free cloth

Step 1: Preparing the iPhone

Make sure your iPhone is turned off before you begin. Use the pentalobe screwdriver to remove the two screws at the bottom of the iPhone 7. Then, use the suction cup to lift the front assembly slightly.

Step 2: Removing the Screen

Insert the plastic prying tool between the bezel and the screen. Gently pry the screen away from the body of the iPhone, being careful not to damage any cables. Lift the screen and pivot it up from the bottom end, like opening a book.

Step 3: Disconnecting the Cables

Using the Phillips screwdriver, unscrew the metal plate that is covering the three cables connecting the screen to the logic board. Carefully disconnect these cables by lifting them straight up from the socket.

Step 4: Removing the Broken Glass

Use the suction cup to lift the broken glass away from the LCD underneath. Be cautious not to scratch the LCD while doing so. Once the glass is removed, clean the LCD with isopropyl alcohol and the lint-free cloth.

Step 5: Installing the New Glass

Take the replacement glass and carefully align it with the LCD. Gently press it into place, ensuring it is securely attached and level. Remove any dust or fingerprints from the surface of the new glass.

Step 6: Reassembling the iPhone

Reconnect the three cables to the logic board and secure them with the metal plate using the Phillips screwdriver. Close the screen and gently press it back into place from the top edge. Finally, use the pentalobe screwdriver to reattach the two screws at the bottom of the iPhone.

And there you have it! By following these easy steps, you can successfully change the glass on your iPhone 7 without the need for professional help. Remember to work slowly and precisely to avoid causing any further damage. Good luck!

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0Vota per primo questo articolo!