Casting the screen of an Android onto a TV can be a great way to enjoy your favorite movies, TV shows, and other content on a big screen. While there are various ways to do so, using a USB is a convenient and reliable method. In this article, we will guide you on how to cast the screen of your Android device onto a TV using a USB cable.

Before we proceed, it is important to note that not all TVs support USB connectivity, so you need to make sure that your TV has a USB port that can be used for this purpose. In addition, you will need an HDMI cable to connect your TV to the Android device.

Step 1: Check the compatibility of your Android device

The first step is to check if your Android device is compatible with USB-to-HDMI output. While most devices come with this feature, some may not support it. To know if your device supports this feature, you can do a quick Google search or check the specifications of your device.

Step 2: Purchase the necessary peripherals

Once you have confirmed that your device is compatible with USB-to-HDMI output, the next step is to purchase the necessary peripherals. You will need an HDMI cable, USB-to-HDMI adapter, and a power source for the adapter (usually a USB port). These peripherals can be found at electronics stores or online retailers.

Step 3: Connect the peripherals

After you have purchased the necessary peripherals, the next step is to connect them. Connect the USB-to-HDMI adapter to your Android device’s USB port. Then, connect the HDMI cable from the adapter to your TV’s HDMI port. Finally, connect the power source to the adapter.

Step 4: Set up the TV

Once the peripherals are connected, you can turn on your TV and set the input to the HDMI port that you’ve connected the adapter to. You should now see the screen of your Android device displayed on your TV.

Step 5: Get ready to cast

Before you cast the screen, you need to enable the USB debugging mode on your Android device. To do this, go to Settings > About Phone and tap on the Build Number seven times. Once the developer options have been enabled, go to Developer options and enable USB debugging.

Step 6: Cast the screen

Now that you have enabled the USB debugging mode, you can start casting your screen. Swipe down on your Android device to reveal the notification panel, and then tap on Cast Screen. Select the name of your TV from the list of available devices, and the screen of your Android device should now be mirrored on your TV.

Conclusion

Casting the screen of an Android device onto a TV using a USB cable can be a convenient and easy way to enjoy your favorite content on a bigger screen. With the steps above, you should now be able to connect and cast your Android device’s screen onto your TV using a USB cable. However, if you experience any issues, you can always seek further assistance from the manufacturer of your TV or Android device.

Quest'articolo è stato scritto a titolo esclusivamente informativo e di divulgazione. Per esso non è possibile garantire che sia esente da errori o inesattezze, per cui l’amministratore di questo Sito non assume alcuna responsabilità come indicato nelle note legali pubblicate in Termini e Condizioni
Quanto è stato utile questo articolo?
0
Vota per primo questo articolo!