Materials You’ll Need:
- A sturdy wooden base
- Two wooden boards (8×12 inches each)
- A manual grinder mechanism
- Wood screws
- A drill
- A saw
- Sandpaper
Step 1: Prepare the Base
Start by placing your sturdy wooden base on a flat surface. This will serve as the foundation for your cereal crusher. Ensure that it is stable and won’t move during use.
Step 2: Create the Crusher Body
Take one of the wooden boards and place it upright against the base. Use wood screws to securely attach it to the base. This will act as the backboard for your crusher. Repeat the process with the other board, aligning it parallel to the first one. These boards will form the sides of the crusher body, enclosing the cereal as it is being crushed.
Step 3: Install the Grinder Mechanism
Now it’s time to install the manual grinder mechanism. Measure and mark the center point on the top board of your crusher body. Use a drill to create a hole that matches the diameter of the grinder mechanism. Insert the mechanism and secure it tightly.
Step 4: Finishing Touches
It’s all coming together! Make sure all screws are tightened, and check the stability of your cereal crusher. If needed, make adjustments for a snug fit. Use a saw to trim any excess lengths of wood for a clean appearance. Finally, smooth any rough edges with sandpaper.
Step 5: Test and Enjoy
Now that your cereal crusher is built, it’s time to put it to the test. Pour your favorite cereal into the crusher, turn the grinder mechanism, and watch as your cereal is crushed to perfection. You can adjust the fineness of the crush by modifying the grinder mechanism as desired. Once crushed, transfer your cereal into a bowl, add milk, and enjoy the texture and flavor of your freshly crushed cereal!
Congratulations! You’ve successfully built your very own cereal crusher. Say goodbye to unsatisfying breakfasts and hello to a whole new level of cereal enjoyment. Happy crushing!