Guide to Performing a Factory Reset on the PXN V9

The PXN V9 is a popular gaming controller that offers a fantastic gaming experience for both beginners and experienced gamers. Occasionally, you may encounter some issues with this controller, such as connectivity problems or unresponsiveness. In such cases, performing a factory reset may be necessary. This guide will walk you through the step-by-step process of resetting your PXN V9 controller.

Before proceeding with the reset, it’s important to note that performing a factory reset will erase any customized settings on your controller. Make sure to back up any important game profiles or configurations you have saved.

Step 1: Power off the PXN V9 controller
To begin the reset process, ensure that your PXN V9 controller is powered off. Locate the power button on the controller and press it for about three seconds. This will turn off the controller completely.

Step 2: Enter reset mode
Once the controller is powered off, press and hold both the Home and Mode buttons simultaneously. While holding these buttons, connect the controller to your computer or gaming console using a micro USB cable. This will put the PXN V9 into reset mode.

Step 3: Download the firmware update tool
To proceed with the reset, you’ll need to download the firmware update tool specific to the PXN V9 controller. Visit the official PXN website and locate the support section. From there, find the firmware update tool for your model and download it to your computer.

Step 4: Install the firmware update tool
After downloading the firmware update tool, locate the file on your computer and double-click to open it. Follow the on-screen instructions to install the tool on your computer. Once the installation is complete, launch the firmware update tool.

Step 5: Connect the PXN V9 controller
Using the micro USB cable, connect the PXN V9 controller to your computer while it is still in reset mode. The firmware update tool should automatically detect the controller and display it on the screen.

Step 6: Reset the PXN V9 controller
Within the firmware update tool, locate the option to perform a factory reset. This option might be labeled differently depending on the tool, but it typically involves clicking on a “Reset” or “Restore” button. Click this button to initiate the factory reset process.

Step 7: Wait for the process to complete
The firmware update tool will now start resetting the PXN V9 controller. The process might take a few minutes, so be patient and avoid disconnecting the controller during this time. Once the reset process is complete, you will receive a notification.

Step 8: Disconnect the PXN V9 controller
After the reset is done, safely disconnect the PXN V9 controller from your computer. Unplug the micro USB cable from both the controller and your computer.

Step 9: Power on the PXN V9 controller
You can now power on the PXN V9 controller by pressing and holding the power button for a few seconds. After powering on, you will notice that the controller has been restored to its default factory settings.

Performing a factory reset on your PXN V9 controller can help resolve various issues you may encounter during your gaming sessions. Just remember to save any important profiles or configurations before proceeding with the reset process. Enjoy your gaming experience with your refreshed PXN V9 controller!