What You’ll Need:
- Fabric of your choice
- Measuring tape
- Sewing machine
- Thread
- Straight pins
- Iron
- Scissors
Step 1: Measure your Curtain
Start by measuring the top edge of your curtain. This measurement will determine the width of your rod pocket. Make sure to add an extra inch or two to allow space for the curtain rod to slide through.
Step 2: Cut the Fabric
Using your measurements, cut a strip of fabric that is twice the width of your desired rod pocket, plus an additional inch for seam allowance. The length of the strip should be the same as the width of your curtain.
Step 3: Iron and Fold
Iron the fabric strip to remove any wrinkles. Then, fold the strip in half lengthwise, with the right sides facing each other. Press the fold to create a crease.
Step 4: Pin and Sew
Open up the fabric strip and lay it flat with the wrong side facing up. Along the top and bottom edge, fold the fabric towards the center crease and pin it in place. Make sure the folded edges align with each other. Sew along the top and bottom edge, securing the folds and creating the rod pocket.
Step 5: Trim and Finish
Carefully trim any excess fabric and loose threads. Turn the fabric strip right side out and use an iron to press it flat, ensuring the rod pocket is crisp and smooth. Your curtain rod pocket is now ready for installation!
Creating a curtain rod pocket is a simple and rewarding project that can instantly elevate the look of your curtains. With just a few materials and basic sewing skills, you can create a polished and professional finish. So go ahead and give it a try!